Products

Part number Pin to Pin Compatibility Function Features Application, features Process Description Gate Trigger Current, Igt, mA I2t, for Fusing, I2t, A2c Latching Current, IL, mA Off-State Leakage Current, Id,Ir,mA Package Peak Gate Current, Igm, A Pins (Pads) Repetitive Peak Off-State Voltages, V drm, Vrrm, V RMS On-State Current, It (RMS)
IZ1308B LT1308B Microcircuit IZ1308В is a step up pulse voltage converter                        
IN18B20D* DS18B20 Integrated circuit of digital sensor-measurer  of temperature for industrial temperature range
Measurement temperature range:
from -55°C to +125°C
Temperature value is converted to 12-bit digital code
Accuracy of temperature indication  can be programmed by customer form 9 to 12 bit
Alarm signal for case of temperature excess of threshold values determined (programmed) by customer
Unique 64-bit serial number for each IC, not available for changes by customer
Data read/write operation from memory of IC,1-wire interface of data transfer
                SO-8    
Field P DMOS transistors       MOSFET

Low-power

Vtn= 0,8-2,0V

Ubr=50-240V

Pmax=1,0 Watt

 

High-power

Vtn= 2,0-4,0V

Ubr=60-100V

 

Pmax=150 Watt
Number of masks, pcs.                                             7-9

Min design rule,µm                                                     3.0

Substrate:                      Si/B-doped/ p-type/Res 0,005

Epi layer: 

thickness                                                        (15-34) µm

Resistivity                                               (2÷21) Ohm/cm

Gate oxide                                                  (42,5÷80) nm

Interlayer dielectric                        medium temp. PSG 

Passivation:                                            low temp. PSG 
                 
Field N DMOS transistors       MOSFET

Low-power

Vtn= 0,6-3,0V

Ubr=50-200V

Pmax=1,0 Watt

 

High-power

Vtn= 2,0-4,0V

Ubr=50-600V

Pmax=200 Watt
Number of masks, pcs.                                              7-9

Min design rule,µm                                                      3.0

Substrate:                        Si/Sb-doped/ n-type/Res 0,01

Epi layer: 

Thickness                                                          (9÷42) µm

Resistivity                                              (0,7÷16) Ohm/cm

Gate oxide                                                    (42,5÷80) nm

Interlayer dielectric -                        medium temp. PSG 

Passivation:                                               low temp. PSG 
                 
Power field MOS transistors, Umax= 60÷900 V, 150 mm wafers       MOSFET

NMOS: Vtn=2÷4 V

Umax= 60÷900 V
Number of masks, pcs.                                                8

Min design rule,µm                                                    2.0

Substrate:                  Si/Sb-doped/ n-type/Res 0,015; 

                                   Si/ As-doped/ n-type/ Res 0,003

Epi layer:

thickness                                                         8÷75) µm

Resistivity                                     (0,67÷31,5) Ohm/cm

Gate oxide                                                  (60÷100) nm

Interlayer dielectric       medium temp. oxide + BPSG 

Passivation                                    PEoxide + PE SI3N4
                 
BiCDMOS, LOCOS isolation, 1 PolySi, 1 Me, NMOS/PMOS transistors       Low-voltage transistors:

NMOS: Vtn= 1.8 V, Usd >16 V

PMOS: Vtp= 1.5 V, Usd >16 V

NPN: h21e= 100-300

Resistors in layer:

PolySi 1= 20-30 Ohm/sq

 

High-voltage transistors :

NDMOS: Vtn= 1.0÷1.8 V, Usd >=500 V

PDMOS: Vtp= 0.7÷2.0 V, Usd >=700 V
Number of masks, pcs.                                             15

Min design rule,µm                                             2.8

Substrate:                                   Si/B-doped/ p-type/ Res 80

Isolation:                                                                   LOCOS

P-well depth, µm                                                     6.5

N-well depth, µm                                                     4.5

NDMOS base depth, µm                                         2.4

Gate SiO2, Å                                                           600

Interlayer dielectric – Medium temp. PSG, µm       0,6                           

Channel length (gate): N/PMOS, µm                     2.0

Contacts, µm                                                    2.0x2.0

Space line Me 1, µm                                                 8

Space line Me 2, µm                                                10
                 
90 V, p-n junction isolation, 1 PolySi, 1 Me, NMOS/PMOS low-voltage transistors, NDMOS/PDMOS high-voltage lateral transistors, power vertical NDMOS transistor, bipolar vertical NPN & lateral PNP transistors       Small and medium-scale integration analogue IC, VDD <  90 V

NPN Vertical:

bn =50 Uсе=20 V

PNP Lateral:

bр =25 Uсе=20 V

LNDMOS: Vtn= 2.0 V, Usd >90 V

LPDMOS: Vtp= -1.4 V, Usd >90 V

NMOS: Vtn= 1.2 V, Usd >18 V

PMOS: Vtp= 1.5 V, Usd >18 V

VNDMOS: Vtn= 2.0 V, Usd >70 V

 

Resistors in layer:

NDMOS base, Р-drain, PolySi.

Capacitors: PolySi-Si (SiO2 750Å)

PolySi-Al (SiO2 8000 Å)
Numberofmasks, pcs.                                             19

Min design rule,µm                                              4.0

Substrate:          Si/B-doped/  p-type/ Thk 460/ Res 12/ (100)

Buried layers:                  Si/Sb-doped/ n-type/Thk 20/Res 6;

                                      Si/B-doped/ p-type/Thk 250/Res2.0 ;

Epi layer:                     Si/P-doped/ n-type/ Thk 10/ Res 1.5;

Isolation:                                                    p-n junction

P-well depth, µm                                                     6.5

NDMOS base depth, µm                                         2.5

Gate SiO2, Å                                                          750

NPN p-base depth, µm                                            2.5

N+emitter depth, µm                                               0.5

Interlayer dielectric - BPSG, µm                             0,8                                           

Channel length (gate):

N/PMOS, µm                                                         Ø 4

Space line PolySi, µm                                                7

Contacts, µm                                                              2

Space line Me, µm                                                     8
                 
BiCDMOS 600 V, p-n junction isolation, 1 PolySi, 1 Me       SMPS-IC  

Low voltage NPN:

h21E   50 min, Uсе 30V min

PNP Lateral:

h21E=2,2-30 Uсе=25-60 V

NDMOS: Vtn=1.2-3.0 V,  Usd >=30 V

Low voltage PMOS:

Vtp=0.8-2.0 V, Usd  >=18 V

High voltage PMOS:

Vtp=0.8-2.0 V, Usd  >=22 V

Low voltage NMOS:

Vtn=0.8-2.0 V, Usd  >=18 V

High voltage NMOS:

Vtn=0.8-2.0 V, Usd  >=600 V
Number of masks, pcs.                                              15

Min design rule,µm                                                     3.0

Substrate:           Si/B-doped/ p-type/ Thk 460/ Res 60/ (100)

Isolation:                                                        p-n junction

NDMOS base depth, µm                                             2.5

Gate SiO2, Å                                                                 750

Interlayer dielectric – medium temp. PSG, µm       0,8
                 
BiCDMOS 48 V, p-n junction isolation, 1 PolySi, 1 Me       Power electronics actuator  IC

NPN Vertical:

h21E=25-90 Uсе=20-70 V

PNP Lateral:

h21E=2,2-30 Uсе=25-60 V

NDMOS: Vtn=1.8-2.6В, Usd=60-100 V

Low voltage PMOS:

Vtp=0.8-1.4 V, Usd =20-35 V

High voltage PMOS:

Vtp=1.2-2.2 V, Usd =30-80 V

NMOS  transistor:

Vtn=1.1-1.7 V, Usd =15-25 V
Number of masks, pcs.                                               16

Min design rule,µm                                                      3.0

Substrate:            Si/B-doped/ p-type/ Thk 460/ Res 12/ (100)

Buried layers:                  Si/Sb-doped/ n-type/Thk 20/Res 6;

                                       Si/B-doped/ p-type/Thk 250/Res2.0

Epi layer:                      Si/P-doped/ n-type/ Thk 12/ Res 1.5;

Isolation:                                                         p-n junction

P-well depth, µm                                                          5.0

Gate SiO2, Å                                                                750

Interlayer dielectric – Medium temp. PSG, µm       0,8
                 
200 V, p-n junction isolation, 1 PolySi, 1 Me, NDMOS/PDMOS, high-voltage transistors       Small -scale integration analogue IC, 

VDD <  210 V

 

NPN Vertical:

bn =70 Uсе=50 V

NDMOS: Vtn= 2.0 V,

Usd >200 V

PDMOS: Vtp= -1.0 V,

Usd >200 V

NMOS: Vtn= 1.5V, Usd >20V

 

Resistors in layer:

NPN base, Р-drain, PolySi.

 

Capacitors: PolySi-Si (SiO2 900 Å)

PolySi-Al (SiO2 1600 Å)
Number of masks, pcs.                                            19

Min design rule,µm                                             4.0

Substrate:        Si/B-doped/ p-type/ Thk 460/ Res 12/ (100)

Buried layers:            Si/Sb-doped/ n-type/Thk 30/Res 5.5;

                                  Si/B-doped/ p-type/Thk 300/Res2.0 ; 

Epi layer: Si/ P-doped/ n-type/ Thk 27/ Res 8.0;

Isolation:                                                    p-n junction

P-well depth, µm                                                      6.5

NDMOS base depth, µm                                          3.0

Gate SiO2, Å                                                           900

NPN p-base depth, µm                                             2.5

N+emitter depth, µm                                                0.8

Interlayer dielectric –  medium temp. PSG

0,55mm +SIPOS 0.1µm + medium temp. PSG    1,1µm

Channel length (gate):

N/PDMOS, µm                                                            6                                            

Space line PolySi, µm                                                 8

Contacts, µm                                                             Ø4

Space line Me, µm                                                      12
                 
8 V, 0.8 µm, BiCMOS, 3 Poly Si,2 Me, PolySi-emitters, 150mm wafers       Analogue-digital  IC for TV-receivers, Ucc=8V

 

NMOS: Vtn=0.6 V, Usd >12 V

PMOS: Vtр=-0.9 V, Usd >12 V

NPN vertical:

bn =120    Uce=10 V

PNP lateral:

bp =45      Uce=13 V
Number of masks, pcs.                                           26

Design rule,µm                                                     0.8

Substrate:                           Si/B-doped/ p-type/Res 3

Epitaxy:                 Si/P-doped/ n-type/ Thk 2.4/ Res 4.5

p-well depth with p+cc, µm                                   4.3

n-well depth with n+cc, µm                                   4.3

Gate SiO2, Å                                                        130

Interlayer dielectric:                                         BPSG

Interlevel dielectric:                           PEoxide+ SOG

NMOS/PMOS channel length, µm                 0.9/1.0

N&P LDD- drains

Me I                                               Ti-TiN/Al-Si/TiN

Me II                                                      Ti/Al-Si/TiN

NPN emitter size, µm                                    1.2*3.2

Space line PolySi 2,µm                                       1.8

Contacts 1, µm                                                  Ø 0.9

Space line Me 1, µm                                             2.2

Contacts 2,µm                                                  Ø 0.9

Space line Me 2, µm                                             2.4
                 
1.2 µm CMOS PROM, 2 PolySi, 2 Me, zappable link       CMOS master-slice chip

 NMOS: 

Vtn=1.0 V, Ic >10 mA. Ubr>12V

 

PMOS: 

Vtр=1.0 V, Ic >4.0 mA, Ubr>12V
Number of masks, pcs.                                              11

Design rule,µm                                                        1.2

Substrate:                            Si/B-doped / p-type/Res 12

N/P-well depth, µm                                                  5/6

Gate SiO2, Å                                                    250-300

Interlayer dielectric:                                            BPSG

Channel length: NMOS/PMOS, µm                         2.0

Contacts, µm                                                     2.0x2.0

Space line Me1, µm                                                    8

Space line Me 2, µm                                                  10
                 
1.2 µm CMOS, 1 PolySi, 2 Me       CMOS master-slice chip

 NMOS: 

Vtn=0.7 V, Ic >11.5 mA. Ubr>12V

PMOS: 

Vtр=0.8 V, Ic >4.5 mA, Ubr>12V
Number of masks, pcs.                                          11

Design rules,µm                                                   1.2

Substrate:                        Si/B-doped/ p-type/Res 12

N/P-wells depth, µm                                             5/6

Gate SiO2, Å                                                     250-300

Interlayer dielectric:                                              BPSG

Channel length: NMOS/PMOS, µm                    1.4/1.6

Space line PolySi, µm                                               2.8

Contacts, µm                                                      1.6x1.6

Space line Me1, µm                                                  3.4

Space line Me2, µm                                                  3
                 
5 V, 3 µm CMOS, 1 PolySi, 1 Me       Small and medium-scale integration logic IC, VDD < 5 V

 

 NMOS: 

Vtn=0.8-1.2 V, Ic >4 mA. Ubr>8V

PMOS: 

Vtр=0.8-1.2 V, Ic >2 mA, Ubr>8V
Number of masks, pcs.                                          11

Design rule,µm                                                    2.0

Substrate:                       Si/P-doped/ n-type/Res 4.5

N/P-wells depth, µm                                            6-8

Gate SiO2, Å                                              425 / 300

Interlayer dielectric:                                        BPSG

Channel length: NMOS/PMOS, µm                     3-4

Space line PolySi, µm                                           10

Contacts, µm                                                       4*4

Space line Me, µm                                                10
                 
1.5 V, 3.0 µm CMOS, 1 PolySi 1 Me, not self-aligned gate       Clock/ watch IC of small and medium-scale integration, VDD < 1.5 V

 

NMOS: 

Vtn=0.7/0.5 V, Usd >8 V, Ic>4mA

PMOS: 

Vtр=-0.7 V/-0.5, Usd >8 V, Ic>2mA
Number of masks, pcs.                                          9

Design rules,µm                                            3,0-5,0

Substrate:                    Si/P-doped/ n-type/Res 4.5

P-well depth, µm                                                   6-8

Gate SiO2, Å                                                          800

Interlayer dielectric:                 medium temp. PSG

Channel length: NMOS/PMOS, µm                       3

Space line PolySi, µm                                           10

Contacts , µm                                                            5

Space line Me, µm                                                 12
                 
3-5 V, 0.8 µm CMOS, 1 PolySi (2 PolySi), 2 Me, 200mm wafers       IC for telephony, customized IC,

VDD 3 V… 5  V

 

NMOS: Vtn=0.6 V, Usd >10 V

PMOS: Vtр=-0.7 V, Usd >10 V
Number of masks, pcs.                                   14 (16)

Design rule,µm                                                    0.8

Substrate:                        Si/ P-doped/n-type/Res 4.5

                     or  Si/B-doped/ p-type/Res 12; 2 wells

N/P-wells depth, µm                                           4/4

Interlayer dielectric:

SACVD SiO2 + PE (TEOS)                          1,05 µm

Gate SiO2, Å                                                 130/160

NMOS/PMOS channel length, µm                 0.9/1.0

N&P LDD- drains

Me I                                                    Ti/AlCu/Ti/TiN

Space line PolySi,µm                                           1.9

Contacts 1 (filled in by W), µm                         Ø 0.7

Space line Me 1, µm                                             2.2

Me2                                                               Ti/AlCu

Contacts 2 (filled in by W),µm                        Ø 0.7

Space line Me 2, µm                                             2.4
                 
3-5 V, 0.8 µm CMOS, 1 PolySi (2 PolySi), 2 Me, 150mm wafers       IC for telephony,

customized IC, VDD 3 V… 5  V

 

NMOS: 

Vtn=0.6 V, Usd >10 V

PMOS: 

Vtр=-0.7V, Usd >10 V
Number of masks, pcs.                                 14 (16)

Design rule,µm                                                 0.8

Substrate: Si/P-doped/ n-type/Res 4.5

or Si/B-doped/ p-type/Res 12;                      2 wells

N/P-wells depth, µm                                           4/4

Interlayer dielectric:                                       BPSG

Gate SiO2, Å                                             130 /160

Channel length NMOS/PMOS, µm               0.9/1.0

N&P LDD- drains

Me I                                               Ti-TiN/Al-Si/TiN

Space line PolySi, µm                                         1.9

Contacts 1, µm                                                Ø 0.9

Space line Me 1   2.2Me 2                       Al-Si/TiN

Contacts 2,µm                                                 Ø 0.9

Space line Me 2, µm                                           2.4
                 
5 V, 1.5 µm CMOS, 1 PolySi, 1 Ме, PolySi- resistors, 150mm wafers       Supply voltage controllers 

NMOS:

Vtn= 0.5 V, Usd >10 V

PMOS:

Vtp= 0.5V, Usd >10 V
Number of masks, pcs.                                      17

Design rule,µm                                                   1.5

Substrate:      Si/B-doped/p-type/Res 12;      2 wells                   

N/P-well depth, µm                                              5/6

P-type PolySi resistors

Bipolar vertical NPN transistor

Gate SiO2, Å                                                       250

Interlayer dielectric:                                       BPSG

Channel length: NMOS/PMOS, µm                   1.7

N&P LDD- drains

Space line PolySi, µm                                          2.5

Contacts, µm                                                     Ø 1.3

Space line Me, µm                                                3.5
                 
5 V, 1.5 µm CMOS, 1 PolySi, 1 Me, 150mm wafers       Digital IMC, microcontrollers with VDD= 5V

 

NMOS: Vtn= 0.6V, Usd >10 V

PMOS: Vtp= 1.0V, Usd >13 V
Number of masks, pcs.                                                    16

Design rule,µm                                                                 1.5

Substrate:                 Si/B-doped/ p-type/Res 12      2 wells                                               

N/P-well depth, µm                                                           5/6

Interlayer dielectric:                                                      BPSG

Gate SiO2, Å                                                                     250

Interlayer dielectric:                                                     BPSG

Transistor built in ROM

Buried contacts

Channel length: NMOS/PMOS, µm                               1.5

 N & P LDD- drains

space line PolySi,µm                                                       2.5

contacts, µm                                                                  Ø 1.5

space line Me,µm                                                             3.5  
                 
1.5 V, 1.6 µm CMOS, 1 PolySi, 1 Me, low threshold, 150mm wafers       Medium-scale integration digital IC for electronic timepieces and micro calculators, VDD 1.5 V¸3 V.

 

NMOS: Vtn= 0.5 V, Usd >10 V

PMOS: Vtp= -0.5 V, Usd >10 V
Number of masks, pcs.                                                    11

Design rule,µm                                                              1.6

Substrate:           Si/ B-doped/ p-type/Res 12          2 wells                          

N/P-well depth, µm                                                        5/6

Gate SiO2, Å                                                                 300

Interlayer dielectric – BPSG

Channel length: NMOS/PMOS, µm                               2.0

space line PolySi , µm                                                    3.2    

contacts, µm                                                                Ø 1.5

space line Me, µm                                                           3.6   
                 
5 V, 1.2 µm CMOS, 2 PolySi, 2 Me, low voltage EEPROM, 150 mm wafers       LSI EEPROM, VDD:2,4 V… 6  V

LV NMOS: Vtn=(0.4-0,8)V,  Usd>=12 V

LV PMOS: Vtр=-(0.5-0,9)V,

Usd ≤-12 V

HV- NMOS: Vtn=(0,3-0,6)V, Usd>=17 V

HV- РMOS: Vtр=-(0,6-1,0)V,

Usd ≤-15 V
Number of masks, pcs.                                                3

(marked)

Design rule, µm                                                         1.2

Substrate:               Si/B-doped/ p-type/Res 12, 2 wells                 

N/P-well depth, µm                                                    5/6

Gate SiO2:

Low voltage transistors, Å                                         250

High voltage transistors, Å                                        350

Tunnel SiO2, Å                                                          77

Interlayer dielectric-1: Si3N4, Å                               350

Interlayer dielectric -2: BPSG, Å                             7000

Interlevel dielectric: PEoxide+SOG+ PEoxide

Channel length:

Low voltage NMOS/PMOS, µm                             1.4/1.6

High voltage NMOS/PMOS, µm                            2.6/2.6

N & P LDD- drains

Built-in transistors

Space line PolySi 1, µm                                                 3.2     

Space line PolySi 2, contact free, µm                            2.4

Space line PolySi 2, with contact, µm                           4,6

Contacts-1, µm                                                          Ø 1.2

Space line  Me 1, contact free, µm                               3.2

Space line Me 2, with contact, µm                               4,4

Contacts 2, µm                                                         Ø 1.4

Space line Me 2, contact free, µm                                4.4

Space line Me 2, with contact, µm                                4,8
                 
5 V, 1.6 µm CMOS, 2 PolySi,1 Me, EEPROM, 150 mm wafers       Medium-scale integration EEPROM, VDD:2,4 V… 6  V

 

NMOS: Vtn=(0,65+-0,25)V, 

Usd >=12 V

PMOS: Vtр=-(0,8+-0,2)V,

Usd ≤-12 V

 

HV- NMOS: Vtn=(0,45+0,15)V Usd³17 V

HV- РMOS: Vtр=-(0,8+0,2)V    Usd ≤-16 V
Number of masks, pcs.                                             17

Design rule, µm                                                       1.6

Substrate: Si/B-doped/p-type/Res 12               2 wells                            

N/P-well depth, µm                                                 5/6

Gate SiO2, Å                                                          425

Tunnel SiO2, Å                                                       77

Interlayer dielectric-1: Si3N4, Å                            350

Interlayer dielectric -2: BPSG, Å                           7000

Built-in transistors

Channel length: NMOS/PMOS

Low-voltage transistors, µm                                     2.4

High- voltage transistors, µm                                    3.6

Space line PolySi 1, µm                                           3.2     

Space line PolySi 2, µm                                           4.2

Contacts, mm                                                        Ø 1.2

Space line Me, µm                                                   4.4
                 
5 V, 2 µm CMOS, 1 PolySi, 1 Me       Small and medium-scale integration logic IC,  VDD < 5 V

 

NMOS: Vtn=0.6/ 0.5 V, Usd >12 V

PMOS: Vtр=-0,7V/-0,5,   Usd >14 V
Number of masks, pcs.                                                     11

Design rule, µm                                                              2.0

Substrate: Si/ /n -type/ Phosphorus/Res 4.5,           2 wells                  

N/P-well depth, µm                                                        6/7

Gate SiO2, Å                                                           425/300

Interlayer dielectric:                                                   BPSG

Channel length: NMOS/PMOS, µm                               2.5

Space line PolySi, µm                                                    4.5     

Contacts, µm                                                            2.4*2.4

Space line Me, µm                                                          8.5
                 
5 V, 1.5 µm CMOS, 1 PolySi, 2 Me       Small and medium-scale integration logic IC, VDD < 5 V

NMOS:

Vtn= 0.8 V, Usd >12 V

PMOS:

Vtp= -0.8 V, Usd >12 V
Number of masks, pcs.                                            14

Design rule,µm                                                      1.5

Substrate:                         Si/ P-doped/n-type/Res  4.5                        

N/P-well depth, µm                                                5/5

Interlayer dielectric:                                            BPSG

Interlevel dielectric:                                        PE oxide

Gate SiO2, Å                                                          245

Channel length:

NMOS/PMOS,µm                                             1.4/2.0

N LDD-drains

space line PolySi , µm                                            3.4

contacts 1, µm                                                     1.5*4.5

space line Me 1, µm                                              6.0

contacts 2, µm                                                     3.0*4.5

space line Me 2, µm                                              9.5
                 
15 V, 5.0 µm CMOS, 1 PolySi, 1 Me, not self-aligned gate       Small and medium-scale integration logic IC, VDD < 20 V

 

NMOS: Vtn= 1.1 V, Usd >27 V

PMOS: Vtp= -1.0 V, Usd >29 V
Number of masks, pcs.                                           9

Design rule,µm                                                    5.0

Substrate: Si/P-doped/ n-type/Thk 460/Res 4.5 (100)                                                

P-well depth, µm                                                   10

Gate SiO2, Å                                                        950

Interlayer dielectric:                    medium temp. PSG

Channel length: NMOS/PMOS, µm                      5/6

space line PolySi,µm                                            5.5

contacts, µm                                                           Ø2

space line  Me, µm                                                   8  
                 
CMOS, 0.35 μm, 2 polySi, 3 metals, E2PROM option, 200 mm wafer       Digital IC with EEPROM,

Epitaxy =2.4¸6.0 V

For low-voltage transistors

NMOS: 

Vtn=0.5 V, Usd >7 V

PMOS: 

Vtр=-0.6 V, Usd >7 V

For high-voltage transistors

Vtn=0.6 V, Usd >16 V

PMOS: 

Vtр=-0.6 V, Usd >9 V
Number of photolithographies, pcs.               27

Design rule, μm                                        0.35

Substrate:                           725KDB0,015(100)

Epitaxial layer:                                  15KDB12

2 wells

Interlayer dielectric:

SACVD SiO2 + PC TEOS, μm            1.05 μm

Gate SiO2, Å                                           250

Tunnel oxide, Å                                          75

Capacitor dielectric                   Si3N4, Å    250

Channel length

NMOS/PMOS, μm     0.35 for low-voltage

                                    transistors

NMOS/PMOS, μm     2.5/1.0 for high-voltage

                                    transistors                                              

N&P LDD- drains

Titanium silicide

Metal I,2                               Ti/AlCu / Ti /TiN

Contacts 1 (W-filled)                              ø 0.5

Metal 1 pitch, μm                                    0.95

Metal 3                                              Ti/AlCu

Contacts 2,3 (W-filled), μm                     ø 0.5

Metal 2 pitch, μm                                      1.1
                 
CMOS, 0.35 μm, 2 polySi, 3 metals, 200 mm wafer       Digital IC,

Epitaxy =2.4¸6.0 V

 

For 3.0 V

NMOS: Vtn=0.6 V, Usd >5 V

PMOS: Vtр=-0.6 V, Usd >5 V

For 5.0 V

NMOS: Vtn=1.0 V, Usd >8 V

PMOS: Vtр=-0.9 V, Usd >8 V
Number of photolithographies, pcs.            22

Design rule, μm                                        0.35

Substrate:                         725KDB0,015(100)

Epitaxial layer:                                15KDB12

2 retrograde wells for high-voltage transistors

2 retrograde wells for low-voltage transistors

Interlayer dielectric:

SACVD SiO2 + PC TEOS, μm        1.05 μm

Gate SiO2, Å    70 for low-voltage transistors

                        350 for high-voltage transistors

Channel length

NMOS/PMOS, μm     0.35 for low-voltage

                                    transistors

NMOS/PMOS, μm     1.0 for high-voltage

                                    transistors                                               

N&P LDD- drains

Titanium silicide

Metal I,2                                Ti/AlCu / Ti /TiN

Contacts 1 (W-filled), μm                        ø 0.4

Metal 1 pitch, μm                                    0.95

Metal                                                  Ti/AlCu

Contacts 2,3 (W-filled), μm                      ø 0.5

Metal 2 pitch, μm                                      1.1
                 
CMOS, 0.35 μm, 1 polySi, 2 metals, 200 mm wafer       Digital IC, highly-resistant,
Epitaxy = 3 V

 

NMOS: Vtn=0.6 V, Usd >5 V

PMOS: Vtр=-0.6 V, Usd >5 V
Number of photolithographies, pcs.               15

Design rule, μm                                        0.35

Substrate:                           725KDB0,015(100)

Epitaxial layer:                                  15KDB12

2 retrograde wells

Interlayer dielectric:

SACVD SiO2 + PC TEOS, μm             1.05 μm

Gate SiO2, Å                                              70

Channel length

NMOS/PMOS, μm                                   0.35

N&P LDD- drains

Titanium silicide

Metal I                                   Ti/AlCu / Ti /TiN

PolySi pitch, μm                                       0.8

Contacts 1 (W-filled), μm                        ø 0.5

Metal 1 pitch, μm                                    0.95

Metal 2                                              Ti/AlCu

Contacts 2 (W-filled), μm                        ø 0.5

Metal 2 pitch, μm                                      1.1
                 
CMOS, 0.35 μm, 1 polySi, 2 metals, 200 mm wafer       Digital IC, highly-resistant,
Epitaxy =5 V

 

NMOS: Vtn=0.6 V, Usd >7 V

PMOS: Vtр=-0.6 V, Usd >7 V
Number of photolithographies, pcs.              14

Design rule, μm                                          0.35

Substrate:                             725KDB0,015(100)

Epitaxial layer:                                   15KDB12

2 retrograde wells

Interlayer dielectric:

SACVD SiO2 + PC TEOS, μm              1.05 μm                                  

Gate SiO2, Å                                             120

Channel length

NMOS/PMOS, μm                                     0.6

N&P LDD- drains

Titanium silicide

Metal I                                     Ti/AlCu / Ti /TiN

PolySi pitch, μm                                        1.0

Contacts 1 (W-filled), μm                         ø 0.5

Metal 1 pitch, μm                                    0.95

Metal 2                                              Ti/AlCu

Contacts 2 (W-filled), μm                       ø 0.5

Metal 2 pitch, μm                                      1.2
                 
КУ613Б ВТА208-800В         ≤50 21 ≤60 ≤0.5 TO-220 2   800 8